What should we pay attention to during the operation of the wood pellet machine

33a97528aec0731769abe57e3e7b1a3

Wood pellet machine operation matters:

   1. The operator should be familiar with this manual, familiar with the performance, structure and operation methods of the machine, and carry out installation, commissioning, use and maintenance in accordance with the provisions of this manual.

  2. Hard (metal) debris should be clear in the processed materials to avoid damage to the machine and cause accidents.

  3. During the processing, it is strictly forbidden for the operator to reach into the transmission part and the granulation chamber to prevent accidents.

  4. Always check the wear of the mold press roller, and adjust, replace or repair if necessary.

   5. If you need to check the wood pellet machine, you must cut off the power supply to ensure safety.

   6. The motor must be installed with a ground wire to avoid accidents.


Post time: Nov-25-2021

Send your message to us:

Write your message here and send it to us