For many family farming friends, the fact that the price of feed is rising year by year is a headache. If you want the livestock to grow up quickly, you must eat concentrated feed, and the cost will be greatly increased. Is there a good equipment that can be used to produce What about the animal’s favorite feed? The answer is yes. The household small feed pellet machine is used to solve this problem. The equipment uses pulverized straw as raw material, and can easily prepare feed pellets of corn straw.

Features of household small feed pellet machine:

The product has a simple structure and consists of a motor, a base, a feeding bin and a pelletizing bin; it has wide applicability and can be used to process corn straw, wheat straw, bran, bean straw, forage, etc. Small footprint and low noise. Powdered straw and forage can be granulated without adding water. The moisture content of the produced pellet feed is basically the moisture content of the material before pelleting, which is more convenient for storage. The particles produced by this machine have high hardness, smooth surface, and sufficient internal curing degree after high temperature and high pressure, which can improve the digestion and absorption of nutrients, and can kill general pathogenic microorganisms and parasites. It is suitable for raising rabbits, fish, ducks and other poultry. Animals can obtain higher economic benefits than mixed powder feed. This model is equipped with 1.5-20mm diameter molds, which are suitable for granulation of different materials and achieve the best effect. The main components of the equipment (die and pressure roller) are processed and forged with high-quality alloy steel, with advanced technology and longer service life. The motor uses the famous brand motor or according to the customer’s request.

Daily maintenance of household small feed pellet machine:

①When the machine is not in use or when the material is changed for production use, remove the residual material in the material cavity. ② Fill lubricating oil on the eccentric shafts of the two rollers before each shift. ③ Always check whether the inner wall clearance of the roller is in a normal state. ④ Frequently clean the surface of the equipment for floating and sinking and dirt. The above maintenance is a daily maintenance, you can refer to the instruction manual, or consult our company’s technicians.

Failure and treatment methods of household small feed pellet machine:

①No particles can be found when the machine is turned on. Check whether the material hole is blocked, if not, use a hand drill to drill the material hole. Pay attention to the water content of the mixture, and adjust the gap between the inner wall of the ring die and the roller. ②The pellet forming rate is low. The reason is that the moisture content of the material is too low, and the moisture content of the powdery material should be increased. ③ The particle surface is rough. It is necessary to pay attention to refueling the material, and perform circulating extrusion to run in to improve the finish. ④The output is too low. If the feeding is not enough, the opening of the gate of the feeder can be increased. If the gap between the inner wall of the ring die and the roller is too large, the gap can be adjusted to about 0.15 mm. If the powder in the ring die is agglomerated, remove the agglomeration in the ring die sleeve. ⑤ The host suddenly stops. First cut off the power supply, after removing the material, check whether the protection switch has tripped, and check the motor condition. It is recommended to contact our company’s technicians for consultation and troubleshooting, and do not modify the lines and components without authorization, otherwise the personal safety problems caused by this will be your responsibility.