The sawdust pellet machine works frequently, and it is normal for it to fail during long-term use, while the sawdust pellet machine has symptoms when it fails.

Xiaobian will give you a specific introduction to the symptoms of the sawdust pellet machine before it fails?

1: During the production process of the sawdust pellet machine, it can be found that the surface of the pellets is uneven and even there are many excess wounds on the pellets. This problem means that there is a problem with the blades inside the pellet machine. If the blades are intact, the pellet cells are produced. The surfaces are very smooth and they are almost uniform in size.

2: The surface of the particles is too smooth, which is a problem, which can explain the relatively small compression ring die in high mechanical hard objects, and compression holes should be added. This relatively rare phenomenon, such a problem is rarely encountered, can also be As early as possible to avoid construction, the first thing to do is to check the raw materials before construction and other hard objects to see if there are any, this is very important.

3: When the moisture content of the particles is too high, it will lead to the phenomenon of machine blockage, so we need to try our best to analyze the construction after testing the moisture content of the particles. , try to avoid construction when the particles are wet, which will increase the load on the machinery and affect the normal production and operation of the sawdust pellet machine.

4: There is a crack in the sawdust granulator machine. This phenomenon is very obvious. Generally, this kind of failure of the sawdust granulator will be heard from the sound. The granulator makes a lot of noise during operation, or a lot of noise. This phenomenon The description is faulty, so we have to stop running the check.

These are all signs that the sawdust pellet machine is malfunctioning. In the use of equipment, most abnormal phenomena are caused either by their own quality problems or by human factors, so in prevention, the key is to start with the quality of the equipment and staff.