In order to let everyone use it better, the following are the five maintenance common senses of the wood pellet machine:

1. Check the parts of the pellet machine regularly, once a month, to check whether the worm gear, worm, bolts on the lubricating block, bearings and other moving parts are flexible and worn. If defects are found, they should be repaired in time, and should not be used reluctantly.

2. When the drum of the pellet machine moves back and forth during work, please adjust the screw on the front bearing to the appropriate position. If the gear shaft moves, please adjust the screw on the back of the bearing frame to the appropriate position, and adjust the clearance to the bearing. There is no sound, turn the pulley by hand, and the tightness is appropriate. Too tight or too loose may cause damage to the machine.

3. After the granulator is used or stopped, the rotating drum should be taken out for cleaning and the remaining powder in the bucket should be cleaned, and then installed to prepare for the next use.
4. The pellet machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other gases that are corrosive to the body.

5. If the pellet machine has been out of use for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth.