The best way to improve the output of straw pellet machine is to buy a good straw pellet machine. Of course, under the same conditions, in order to increase the output of the straw pellet machine, there are still some other ways. The following editor will give you a brief introduction.

First of all, we have to control the content of crude fiber materials. Crude fiber is a very important factor in the straw pelleting process. Too much content has poor cohesiveness, making it difficult to press molding, and too little content is not conducive to molding. Generally, it is best to control it at about 5%. Contact us for the specific value, and we will give the calculation result according to your specific situation.
Second, we need to add grease. When the straw pellet machine is used as a fuel pellet machine, it is necessary to add an appropriate amount of oil to the material, about 0.8%. So what are the benefits of adding oil? First, it reduces the wear and tear of the machine and improves the service life of the machine. Second, the material becomes easier to be pressed and formed, which increases the output. What we should pay attention to here is to control the amount, not too much. The addition method is generally to add 30% in the mixing and stirring part, and spray 70% in the granulator. In addition, if you use a straw pellet machine to make feed pellets, you don’t need it, otherwise the pellets made can’t be eaten by livestock.
The moisture content is controlled at about 13%. For biomass fuel, the moisture of the material must be strictly controlled. This is the premise of pressing the material into pellets. If the moisture is too high, the pellets will be very loose. Not much to say about this, but remember.