More and more people want to open a biomass pellet plant, and more and more biomass pellet machine equipment is purchased. Is the biomass pellet machine easy to break? Maybe you don’t know these things!

Have you changed the pellet machine one after another in the production of biomass pellets, but the pellet production capacity has not improved? If you want to make good pellets, in addition to choosing a good biomass pellet machine, you also need to know the following.

First, buy a refurbished machine?

For more benefits, some businesses choose to use refurbished goods and second-hand goods as brand new resale. If you are a novice in the industry, it is very likely that you have bought a refurbished machine. How do you judge whether the machine you bought is a refurbished machine? I’ll teach you a few tricks.

1. Observe the working panel of the biomass pellet machine. If it is second-hand, the scratches are difficult to repair, and timely renovation will leave more or less traces.

2. Check the accessories on the pellet machine, such as the edges of the screws, if refurbished and repeatedly disassembled, the screws will leave traces, including Phillips screws.

3. Check the plug position of the pin, if it is used, it will leave traces.

Although the biomass pellet machine has a wide range of available raw materials, the machine itself still has requirements for raw materials. Come and see if you have stepped on the thunder!

4. Check the corners of the biomass pellet machine. If the purchased biomass pellet machine is second-hand refurbished, simple cleaning cannot be completely cleaned, and there will be some scattered particles on it.

Second, the raw materials are not suitable?

Although the biomass pellet machine has a wide range of available raw materials, the machine itself still has requirements for raw materials. Come and see if you have stepped on the thunder!

1. Size

When the biomass pellet machine is granulated, there are certain requirements for the size of the raw material. If the raw material is too large or too small, it will affect the output and quality of the biomass fuel pellet machine, and even cause the situation that the material will not be produced or the output will not meet the expectations. Generally, the size of the raw material must be less than 4MM, but the specific crushing size still depends on the required particle diameter.

2. The moisture content of raw materials

When granulating biomass pellets, there are also strict requirements on the water content of the raw materials. No matter what kind of raw materials, the water content must be controlled between 15% and 18%. The higher the water content, if the water content is too low, there may be dry in and dry out, and the particles will not form; if the water content is too high, the particles will be easily broken or loose.

The biomass granulator can mix and granulate different raw materials. The biomass pellet machine can not only use one kind of sawdust to make pellets, but also can be mixed with other kinds of sawdust or coarse fiber sawdust, and can also be mixed with crop straw, fruit husk, peanut shell, straw, etc. However, the incorporation of other materials may have some impact on the quality of the resulting biomass particles.

3. Ingredients of raw materials

The biomass granulator can mix and granulate different raw materials. The pellet machine can not only use one kind of sawdust to make pellets, but also can be mixed with other kinds of sawdust or coarse fiber sawdust, and can also be mixed with crop straw, fruit husk, peanut shell, straw, etc. However, the incorporation of other materials may have some impact on the quality of the resulting biomass particles.

3. Has the maintenance been done?

Like all machines, the biomass pellet machine needs to be regularly inspected, cleaned, lubricated, adjusted or the wearing parts replaced over time. But not everyone knows how to do maintenance work well. The following are the precautions for the daily maintenance of the biomass pellet machine:

1. The more lubricating oil added to the gearbox, the better

Adding an appropriate amount of oil can improve the maintenance of the equipment. If it is added too much, it will have a certain side effect, which is poor lubrication or bearing damage.

Like all machines, the biomass pellet machine needs to be regularly inspected, cleaned, lubricated, adjusted or the wearing parts replaced over time. But not everyone knows how to do maintenance work well.

2. Any lubricating oil is suitable for biomass pellet machine

The additives added to various lubricating oils are different, and the performance is also different. Therefore, it is necessary to select the appropriate lubricant according to the equipment conditions and the use environment to achieve the best lubricating effect.

3. Used waste oil can be reused

Remember not to directly add waste oil into the biomass pellet machine, which will not only not play a lubricating role, but will increase the damage to the equipment.