The operation of the straw pellet machine greatly affects the quality of our finished products after processing. In order to improve its quality and output, we must first understand the four points that need to be paid attention to in the straw pellet machine.

1. The moisture of the raw material in the straw pellet machine should be strictly controlled. If it is too large, it may have a low degree of adhesion during pellet processing. If it is too dry, the granules are more difficult to process. The proportion of moisture affects granulation and yield, so pay attention to the moisture of the material.

2. The adjustment of the gap between the pressing roller and the die plate is selected according to the size of the material particles. If it is too large or too small, it will greatly affect the granulation effect. If it is too thick, it will reduce the particle output, but if the die plate is loaded If the thickness is too low, it will increase the wear of the pressure roller and the die plate and affect the service life. When adjusting, turn the pressing roller on the die plate by hand until we can’t hear the friction sound between the pressing roller and the die plate, indicating that the distance is adjusted in place, and we can continue to use it.
3. The die plate of the straw pellet machine is the processing equipment that we need to pay attention to. It can directly have a certain impact on the material. Therefore, when using it for the first time, we must pay attention to running-in. When adding materials, pay attention to stirring evenly. Do not add too much. Pay attention to the standard of multiple grinding until the particles are gradually loosened, and it can be used.

4. Pay attention to the debugging of the cutter. We all know that if the cutter under the die plate is close to the die plate and the distance is moderate, the relative powder rate will increase, which is more convenient and quick to use. In place, it will affect the particle output. So the cutter should be adjusted to the appropriate position.