What should be paid attention to before the corn stalk pellet machine is turned on? The following is an introduction by the technical staff of the straw pellet machine manufacturer.
1. Please read the contents of this manual carefully before use, operate in strict accordance with the operating procedures and sequence, and carry out installation, operation and maintenance according to their requirements.

2. The equipment workplace should be spacious, ventilated, and equipped with reliable fireproof equipment. Smoking and open flames are strictly prohibited in the workplace.

3. After each startup, idle for three minutes, wait for the machine to run normally, and then load the material evenly; please be sure to remove the hard debris in the raw materials, and prevent stones, metals, inflammable and explosive materials from entering the hopper, so as not to damage the machine.

4. It is strictly forbidden to remove the hopper and start the machine to prevent the material from flying out and hurting people.

5. Do not put your hand into the hopper or use other tools to remove the material during normal startup to avoid danger. Gradually add a little wet material before get off work and shutdown, so that the material can be discharged smoothly after starting the next day.

6. During the rotation of the machine, if you hear any abnormal noise, you should stop it immediately for inspection.

In order to make the machine create greater benefits for us, we strictly abide by the rules for the correct use of the corn stover pellet machine.