The plan is the premise of the result. If the preparation work is in place, and the plan is well executed, there will be good results. The same is true for the installation of biomass fuel pellet machines. In order to ensure the effect and yield, the preparation must be done in place. Today we are talking about the preparations that need to be prepared before the installation of the biomass fuel pellet machine, so as to avoid finding out that the preparations are not done properly during use.

Biomass fuel pellet machine preparation work:

1. The type, model and specification of the pellet machine should meet the needs;

2. Check the appearance and protective packaging of the equipment. If there is any defect, damage or corrosion, it should be recorded;

3. Check whether the parts, components, tools, accessories, spare parts, auxiliary materials, factory certificates and other technical documents are complete according to the packing list, and make records;

4. The equipment and rotating and sliding parts shall not rotate and slide until the anti-rust oil is removed. The anti-rust oil removed due to inspection shall be re-applied after inspection.

After the above four steps are in place, you can start to install the device. Such a pellet machine is safe.
The biomass fuel pellet machine is a machine for processing fuel pellets. The biomass fuel pellets produced are supported and promoted by local government departments as fuel. So, what are the advantages of biomass fuel pellets over traditional coal?

1. Small size, convenient for storage and transportation, no dust and other pollution to the environment during transportation.

2. Mainly use crop straw, soybean meal, wheat bran, pasture, weeds, twigs, leaves and other wastes produced by agriculture and forestry to realize the recycling of waste.

3. During the combustion process, the boiler will not be corroded, and the gas that is harmful to the environment will not be produced.

4. The burned ashes can be used as organic fertilizer to restore cultivated land and promote the growth of plants.