Secretly tell you 2 methods to test the quality of biomass fuel pellet machine products:

1. Take a large container that can hold at least 1 liter of water, weigh it, fill the container with particles, weigh it again, subtract the net weight of the container, and divide the weight of the filled water by the weight of the filled particles.

The calculation result of qualified pellets should be between 0.6 and 0.7 kg/liter, this value can also be regarded as the specific gravity of pellets, it is a very important parameter, it indicates whether the pressure is correct or not when making pellets, those that are not Good particles will have this value below 0.6, they are very easy to crack and pulverize, and they will produce a lot of fines.

2. Put the pellets produced by the biomass fuel pellet machine in a glass of water. If the pellets sink to the bottom, it proves that the density is high enough and the pressure during forming is sufficient. If the pellets float on the water surface, it proves that the density is very low and the quality is very poor. , from a mechanical point of view, its durability is very poor, and it is very easy to pulverize or become fine.

Have you learned the method of testing the particle quality of the fuel pellet machine?