In the process of using straw pellet machine equipment, some customers usually find that the production output of the equipment does not match the output marked by the equipment, and the actual output of biomass fuel pellets will have a certain gap compared with the standard output. Therefore, the customer thinks that the manufacturer has deceived him, and the trust and impression of the manufacturer plummets, and all the responsibility is passed to the manufacturer, but in fact it is not the manufacturer’s problem, so what is the reason for this phenomenon? There are many factors that affect the output of straw pellet machine. The production output of pellet machine is not only the requirement for product quality, but the requirements for the environment and raw materials are also important. Several important factors that affect the output of straw pellet machine or wood pellet machine are listed.

First, the impact of the environment:

1. Because the humidity of straw raw materials and wood sheets in different weather environments is different, the higher the humidity, the worse the pulverization effect and the lower the output.

2. The instability of the power environment will also affect the normal operation of the equipment. The high and low voltage will affect the equipment and output, especially when the voltage is too high, it will even damage the equipment.

Second, the problem of raw materials:

1. Different types of raw materials have the same material, hardness and size, and the crushing effect and granulation effect will also be different. When the material with high moisture content, the straw is more difficult to pulverize due to its toughness, and the moisture in the pulverized straw will reduce the fluidity of the material, and it will have a certain viscosity, and the discharge speed will be reduced, which will reduce the production of the equipment. efficiency.

2. The diameter of the crushing cavity is an important factor affecting the production efficiency of the straw pellet machine. A reasonable crushing cavity diameter can improve the working efficiency of the equipment. Therefore, when designing the diameter of the pulverizing cavity, Zhongchen Machinery pays special attention to the value of the pulverizing cavity diameter, so that it can play a positive role in the productivity of the straw pulverizer.

Third, the maintenance of equipment:

1. The good running state of the straw pellet machine is an important prerequisite for improving its working efficiency. As an important crushing equipment, the work is very labor-intensive, and there will inevitably be wear and depreciation of important components. Therefore, in normal use, users must pay attention to the maintenance of the straw crusher, which can improve production efficiency and prolong service life. dual purpose.

2. Do a good job in machine maintenance and replace the mold in time. Over time, the mold and the pressure roller will wear out, which is inevitable. If this is the reason for the decline in production, it is good to replace the new mold.

Fourth, operating specifications:

1. The operators of the straw pellet machine must undergo professional training, have a comprehensive understanding of the performance of the equipment, and use the equipment reasonably according to the correct operating specifications, which can not only ensure their own personal safety, but also ensure the production efficiency of the equipment, killing two birds with one stone .

2. Spindle speed: Within a certain range, the higher the spindle speed, the higher the production efficiency, but when the speed exceeds the allowable limit value, the production efficiency will drop instead. Because in the idling stroke, if the rotating speed of the main shaft is high, the swing frequency of the moving knife and the hammer is high, and the material passing time is very short, the crushed material will not be discharged in time, resulting in blockage of the crushing cavity and reducing production. efficiency. When the rotation speed of the main uranium is very low, the number of swings of the moving knife and the hammer is very small, and the number of times of crushing the material is also very small, which will also reduce the production efficiency.

Fifth, equipment reasons:

The quality of straw pellet machine plays a decisive role. Nowadays, the market competition of biomass straw pellet machine is fierce and the profit is also low. Therefore, some manufacturers take some unfair measures to reduce the price of straw pellet machine and use some product quality. Poor pellet machine equipment is shoddy. The life of these equipment is generally not very long, and the failure rate is high and the work is missed, which seriously affects the normal production of customers.