When we don’t understand a certain thing or a product, we can’t solve or operate it well, such as the wood pellet machine of the wood pellet machine manufacturer. When we use the wood pellet machine, if we don’t know this product very well, there may be some phenomena that should not occur when using the equipment. For example, the pellet machine suddenly stops producing material. What should we do? What is the reason that the pellet machine does not produce material? Don’t worry, the professional technicians of Kingoro wood chip pellet machine manufacturer will help you answer.

After years of experience analysis, the professional and technical personnel of the wood pellet machine manufacturer have come to the following conclusions:

1. When the wood pellet machine feeds too much material, we may feel that the feeding speed is fast, or increasing the feeding amount can improve the production efficiency and efficiency. However, the starting point may be very good, but the method of increasing the input will not work.

The wood pellet machine may be overloaded due to too many feedings at one time, which will cause the equipment to fail to work normally, resulting in blockage of the wood pellet machine. At this time, we had to stop the wood pellet machine and then deal with the blockage problem. Dealing with blockage may sometimes be quick, and sometimes it will be difficult to deal with it in a short time. However, this method that seems to speed up production actually greatly reduces production efficiency.
2. The amount of raw material water processed by the sawdust pellet machine is inappropriate, sometimes too little, sometimes too much, which will cause the sawdust pellet machine of the sawdust pellet machine manufacturer to block the material. At this time, we should properly adjust the amount of steam entering the sawdust pellet machine. Make it meet the normal production needs of the wood pellet machine.

The raw materials of the wood pellet machine have not been processed properly, and some raw materials have not been pulverized in time, which directly causes the compressed particles to be too large, thus affecting the discharge. This requires the staff to grind the raw materials thoroughly. The pulverized particles are not larger than the length of the particles made of sawdust.
3. The wood pellet machine may directly cause some avoidable and recurring problems in the production of the pellet machine because some small details of the staff are not handled properly.