The design structure of the straw pellet machine is constantly being improved and updated, and the manufacturing technology and equipment performance are becoming more and more mature and stable. a major cost. Therefore, how to extend the service life of the pellet machine mold has become one of the most concerned topics for manufacturers. The correct maintenance method is nothing more than starting from the following points:

1. Use and cleaning of oil

Many manufacturers know that when processing straw pellets, they use oil to replace the material to stay in the die hole before the equipment is shut down, so that the die hole can be discharged normally when the machine is turned on next time. It should be noted that if the equipment is not turned on for a long time, the oil will harden, making it difficult to remove the equipment when it is in use, and it cannot be discharged normally. Forced startup may damage the mold and affect the service life of the mold. When the equipment is installed, the oil in the die hole should be removed in time.

2. Cleaning and storage of pressure rollers and molds

If the mold and pressing roller of the straw pellet machine are not used for a long time, it is recommended to disassemble them, clean the surface materials and particles in the mold holes, and then store them in oil. So as not to corrode the surface of the mold and the mold hole after the material absorbs water.
3. Installation and transportation

The straw pellet machine mold is a high-precision accessory. The mold hole is precisely machined according to the compression ratio of the mold. If the structure of the inner wall of the mold hole is damaged during transportation and installation, it may lead to the molding rate of the mold during pellet processing. low and short service life.

Correct maintenance and use of equipment will increase the service life of the straw pellet machine, and will also save costs for manufacturers and increase equipment output and profits.