What is a biomass pellet machine? Many people may not know it yet. In the past, turning straw into pellets always required manpower, which was inefficient. The emergence of the biomass pellet machine has solved this problem very well. The pressed pellets can be used both as biomass fuel and as poultry feed.

Relying on reasonable planning, environmental protection concept, low consumption, high efficiency, simple operation, and durable service period, biomass pellet machine has won the trust of consumers and a broad development market. There are unlimited business opportunities, which is good for investors. pick.
To create a green life, use energy-saving and environmentally friendly biomass pellet machines

The characteristics of the biomass pellet machine are not only reflected in its raw materials, but also in the following aspects:

1. The design of the equipment is reasonable, the quality is reliable, and it is easy to operate. The automatic control electric heating setting is adopted, which can randomly adjust the dry and humidity of the material to ensure the work efficiency;

2. The equipment is small in size, occupies limited space, consumes less energy, and saves energy;

3. The wear-resistant material selected for the equipment has been specially treated, which can continue to produce, with long life and durable working time;

4. In terms of technology, in order to ensure the stability of the machine and the life of the equipment, the number of bearings has been increased from three to four, and the pitch has been increased to increase the output value.

The pusher uses a live head and a live rod to reduce the repair cost and make the production more convenient. In terms of equipment maintenance, the oil-coated lubrication is changed to oil-immersed lubrication, which prolongs the service life of the equipment.

Many users are often troubled by the poor molding effect or the unreachable output when using the biomass pellet machine. Now the pellet machine manufacturer introduces some knowledge about this issue:

The main factors that determine the shape of the biomass pellet machine are the size and moisture of the wood chips. These two points are crucial. Generally, we require that the size of wood chips should not be larger than two-thirds of the diameter of the pellets processed by the pellet machine, which is about 5-6mm.
Energy saving, environmental protection, and green life are the fashionable themes of today’s society, and the biomass pellet machine is a device that responds to this concept. It uses rural corn stalks, corn cob, leaves and other crops to create a new type of non-polluting fuel, which is its secondary use.

If the size is too large, the time of the raw material in the granulating chamber will be prolonged, which directly affects the output, and if the raw material is too large, it needs to be crushed in the granulating chamber before entering the hole of the abrasive tool, so that the mold is pressed. Increased wheel wear. The biomass pellet machine requires that the moisture content of wood chips is generally between 10% and 15%. If the water is too large, the surface of the processed particles is not smooth and there are cracks, and then the water will not be formed directly. If the moisture is too small, the powder output rate of the biomass pellet machine will be high or the pellets will not be produced directly.