1. The bearing of the pelletizing chamber is worn, causing the machine to shake and generate noise;

2. The large shaft is not fixed firmly;

3. The gap between the rollers is uneven or unbalanced;

4. It may be the problem of the inner hole of the mold.

Hazards of bearing wear in the pelletizing chamber of wood pellet machine equipment:

The biggest hazard of bearing wear of wood pellet machine equipment is to reduce the output of the machine. Therefore, it is necessary to check the machine as soon as possible to find out the cause and eliminate the fault.

Troubleshooting method:

After checking the cause of the problem, it is necessary to replace the parts or adjust the gap. If there is a lack of maintenance personnel, contact the manufacturer in time, and do not replace parts without professionals.

Routine maintenance is very important. Our manufacturer recommends that you pay attention to the maintenance of the sawdust pellet machine equipment at ordinary times, and check whether the mechanical parts are loose or worn before operation.