Many users reported that when the biomass fuel pellet machine is working, most of the bearings will generate heat. With the extension of the running time, the temperature of the bearing will become higher and higher. How to solve it?

When the bearing temperature rises, the temperature rise is the influence of the friction heat of the machine. During the working process of the pellet mill, the bearing rotates and rubs continuously. During the friction process, the heat will continue to be released, so that the bearing will gradually heat up.

First of all, it is necessary to regularly inject lubricating oil into the fuel pellet machine, so that the friction of the bearing can be reduced, thereby reducing frictional heat. When the pellet machine is not lubricated for a long time, the lack of oil in the bearing will cause the friction of the bearing to increase, resulting in an increase in temperature.

Secondly, we can also provide rest time for the equipment, it is best not to use the pellet machine for more than 20 hours.

Finally, the ambient temperature will also have a certain degree of influence on the bearing. If the weather is very hot, the working time of the pellet machine should be appropriately reduced.

When we use the biomass fuel pellet machine, the temperature of the bearing is too high, we should stop it, which is also a maintenance measure for the pellet machine.
The pellet fuel produced by the biomass fuel pellet machine is a new type of biomass energy, with small size, convenient storage and transportation, high calorific value, combustion resistance, sufficient combustion, no corrosion of the boiler during the combustion process, and no harmful to the environment. The gas after combustion can be used as organic fertilizer to restore cultivated land. Main uses: civil heating and domestic energy. It can replace firewood, raw coal, fuel oil, liquefied gas, etc. It is widely used in heating, living stoves, hot water boilers, industrial Boilers, biomass power plants, etc.